Mouldy Silicone Removal & Replacement
Black mould in your silicone isn't just ugly — it's a health hazard and a sign the seal has failed. MaxPro removes every trace of old mouldy silicone and replaces it with premium mould-resistant product that stays clean for years.
Why Silicone Goes Mouldy
Standard silicone sealant is porous and absorbs moisture over time. In wet areas like showers, baths, and kitchen sinks, this creates the perfect environment for black mould (Cladosporium, Aspergillus) to take hold. Cleaning products only bleach the surface — the mould roots remain inside the silicone and regrow within weeks. The only permanent fix is complete removal and replacement with a premium mould-inhibiting product. Painting over or applying new silicone on top of old mouldy silicone will fail within months.
Our Mouldy Silicone Replacement Process
Full Assessment
We inspect all silicone joints in the affected area — shower recesses, bath surrounds, vanity bases, kitchen splashbacks, and window sills. We identify every joint that needs replacement.
Complete Removal
All mouldy silicone is cut out and removed using oscillating tools, scrapers, and silicone remover. We remove 100% of the old product — no shortcuts. Partial removal is the number one cause of premature failure.
Surface Cleaning & Treatment
Joints are cleaned with antifungal solution to kill any remaining mould spores in the substrate. Surfaces are dried thoroughly — applying new silicone over damp surfaces causes adhesion failure.
Premium Mould-Resistant Silicone
We apply a premium mould-inhibiting silicone rated for wet areas. These products contain built-in fungicide that prevents mould regrowth for years, not weeks.
Tooling, Finishing & Cure Advice
Every joint is tooled to a clean concave profile for water runoff and aesthetics. We advise on cure time and how to maintain the silicone to maximise its lifespan.
Where We Replace Mouldy Silicone
- Shower recesses and screens
- Bath surrounds and freestanding tubs
- Vanity and basin bases
- Kitchen splashbacks and sink surrounds
- Laundry tubs and benchtops
- Window sills and reveals
- Toilet base seals
- Tile-to-tile internal corners
How Long Will the New Silicone Last?
| Condition | Expected Lifespan |
|---|---|
| Premium mould-resistant silicone, good ventilation | 8–12 years |
| Premium mould-resistant silicone, poor ventilation | 5–8 years |
| Standard silicone (not our product) | 2–4 years |
| Silicone applied over existing mould | 3–6 months |
Frequently Asked Questions
Can't I just clean the mould off with bleach?
Bleach removes the surface staining but doesn't kill the mould roots inside the silicone. Within 2–4 weeks the mould returns. The only permanent solution is complete removal and replacement with mould-resistant product.
Can you apply new silicone over the old mouldy silicone?
No — and we won't. New silicone applied over old product won't bond properly and will peel within months. Complete removal is essential for a lasting result.
Is black mould in silicone a health risk?
Yes. Black mould produces spores that can cause respiratory issues, allergic reactions, and skin irritation, particularly in children, the elderly, and people with asthma. It should be addressed promptly.
How long does the job take?
A standard shower reseal takes 1–2 hours. A full bathroom including bath, vanity, and shower takes 2–4 hours. We'll give you a time estimate when we quote.
How long before I can use the shower after the silicone is replaced?
We recommend waiting 24 hours before using the shower and 48 hours before exposing the silicone to prolonged water. Full cure is typically 48–72 hours.
What can I do to prevent mould coming back?
Good ventilation is the most important factor — run the exhaust fan during and for 15 minutes after every shower. Squeegee water off tiles and screens after use. We'll give you a full care guide after the job.
Get Rid of Mouldy Silicone for Good
Serving all Melbourne suburbs. Same-week bookings available. Call or send a message and we'll get back to you fast.